Full automatic wire cut strip one end crimping another end stripping
Model No: 501S
Full automatic wire cut strip one end crimping another end stripping tinning 501S
Capacity Wire length 50mm, about 3,200 wires/hour (no twisting)
Applicable wire diameter AWG # 32 ~ AWG#18
Processing length (Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm)
Stripping length Front 0.1~8.0mm rear 0.1~18.0mm
Cutter depth Maximum adjustment 3.50mm resolution 0.01mm
Cutting tolerance Modifiable
Crimping capacity 2 Tons
Detection device Low air pressure, existing of electric wire, existing of the terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.
Auxiliary device Prewire feeding synchronizer, terminal waste paper rewinding device
Power supply single phase, AC180V~242V, 50/60Hz, 10A
Compressed air 0.5 MPa(5kgf / cm2) clean dry air
Dimension 1,800W × 900D × 1,450H, about 400KG- Inquiry now
Detailed description
Full automatic cut strip one end crimping another end stripping tinning 501S
Features
1. cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.
2. the production line can range from AWG18-AWG32, which is very practical.
3. this machine has the function of twisting.
4. ultra short line: middle leaving glue for 18mm
5. the machine's Tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.
6. the machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.
7. the machine is suitable for horizontal, straight OTP mold.
Model |
WPM-501S |
Capacity |
Wire length 50mm, about 3,200 wires/hour (no twisting) |
Applicable wire diameter |
AWG # 32 ~ AWG#18 |
Processing length |
(Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm) |
Stripping length |
Front 0.1~8.0mm rear 0.1~18.0mm |
Cutter depth |
Maximum adjustment 3.50mm resolution 0.01mm |
Cutting tolerance |
Modifiable |
Crimping capacity |
2 Tons |
Detection device |
Low air pressure, existing of electric wire, existing of terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire. |
Auxiliary device |
Prewire feeding synchronizer, terminal waste paper rewinding device |
Power supply |
single phase, AC180V~242V, 50/60Hz, 10A |
Compressed air |
0.5 MPa(5kgf / cm2) clean dry air |
Dimension |
1,800W × 900D × 1,450H, about 400KG |